Shibaura Auto Molding (Encapsulation) System - TechStar Innovations Pte Ltd.


	50X SERIES
	MODULE TYPE
	Features Up to six press modules can be linked according to the production volume. Achieved high productivity of 480Fr/4PRESS by using a servo driven high-speed and high speed loader. Requires only a half of the space of the existing model by development of a ultra-compact module press.

Specifications

	Model	50X
	Clamping force	max 500 kN / PRESS . 2 FRAME
	Transfer force	max 30 kN / PRESS . 2 FRAME
	Machine time	14 sec (refer to *)
	Frame / Machine	4	8	12
	Frame width	16 ~ 63 mm
	Frame length	150 ~ 250 mm
	Tablet diameter	Ø13 ~ Ø18 mm
	Power supply	AC200V, three phases 50/60 Hz.
	Air pressure	0.5 ~ 0.7 MPa
	Air supply	0.8 Nm³/min
	Unit Dimensions	W2560xD1500xH2000 mm	W2800xD1430xH1900 mm	W3600xD1430xH1900 mm
	Unit mass (including die)	4500 kg	7000 kg	9500 kg
	Country Of Origin / Manufacture	Japan

* Machine time is on condition that 8 frames/machine, injection plus cure time is more than 45 sec. This is subject to change depending on process.


			TPS-100 SERIES
			UNIVERSAL TYPE
			Features AC servo drive provides high speed, high cycle and high throughput. Possible to select priority of plunger control (speed/ pressure), and specify plural steps of molding process. It provides higher molding quality. Full array of diagnostic monitor, sensor monitor and guidance functions for easy operation and maintenance. Various options including lead frame preheater and resin tablet preheater are available in response to product type.

Specifications

	Model	TPS-100 (S Type)	TPS-100 (W Type)
	Clamping force	max 1000 kN
	Transfer force	max 60 kN
	Machine time	23 sec
	Frame / Machine	2 / 4 / 6 / 8
	Frame width	16 ~ 45 mm	16 ~ 63 mm
	Frame length	100 ~ 230 mm
	Tablet diameter	Ø13, Ø14 mm	Ø 13 ~ Ø20 mm
	Power supply	AC200V, three phases 50/60 Hz.
	Current consumption	100A
	Air pressure	0.54 MPa
	Air supply	1.5 Nm³/min
	Unit Dimensions	W2560xD1500xH2000 mm	W2800xD1430xH1900 mm
	Unit mass (including die)	4500 kg	7000 kg
	Country Of Origin / Manufacture	Japan


	TPS-H SERIES
	IN-LINE HOOP TYPE
	Features Rational arrangement of units and parallel movement for high cycle production. AC servo motors for loading lead frames offer high speed and high reliability. Can handle various types of lead frames such as units with heat sink and wide frames up to 70mm. With a touch-panel key, a graphical display and full array of high-level monitoring functions, it is easy to input and edit molding parameters.

Specifications

	Model	TPS-H80	TPS-H20
	Clamping force	max 785 kN	max 196 kN
	Transfer force	max 19.6 kN	max 7 kN
	Machine time	23 sec	15 sec
	Frame / Machine	1 REEL
	Frame width	max 70 mm	17.5 mm
	Tablet diameter	Ø13 ~ Ø16 mm	Ø16 mm
	Power supply	AC200V, three phases 50/60 Hz.
	Current Consumption	100A	60A
	Air pressure	0.44 MPa	0.352 MPa
	Air supply	1.5 Nm³/min	0.5 Nm³/min
	Unit Dimensions	W1884xD1748xH1880 mm	W1700xD1320xH1700 mm
	Unit mass (including die)	4200 kg	2500 kg
	Country Of Origin / Manufacture	Japan

Short Cut Jumps

[ Home ] [ Company's Profiles ] [ Products & Services ] [ Enquiry ]
[ TechStar U-kit ] [ Wire Bonder ] [ Flip Chip Bonder ] [ Die Bonder ]
[ Leadframe Inspection System ] [ Aluminium Wedge Bonder ] [ Solder Spheres ]
[ Fundamentals Of Wire Bonding Process ]

This website is best viewed at 800 x 600 resolution with IE 4 or higher.

TECHSTAR INNOVATIONS PTE LTD
25 Pandan Crescent #06-15, TIC Tech Centre
Singapore 128477
Tel: (65) 6 899 0010 Fax: (65) 6 899 0050
e-mail: enquiry@techstar-i.com

© Copyright 2001, All rights reserved. Techstar Innovations Pte Ltd.
Designed, created & managed by Techstar Innovations Pte Ltd.